GlossaryEN1 min readUpdated: Jun 25, 2026
Lifting Chain Certification and Inspections
A lifting chain is a steel link chain used to suspend and move heavy loads vertically or at an angle in industrial, port, and logistics environments.
Quick Answer
Last updated: Published:
Source: https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.184
Category
Logistics concept
Reading time
1 min
Words
121
Mentioned in
–
Definition & Explanation
A lifting chain is a steel link chain used to suspend and move heavy loads vertically or at an angle in industrial, port, and logistics environments. Certification by an accredited body establishes the chain's grade – commonly Grade 80 or Grade 100 – based on verified material composition, weld integrity, and load capacity; higher grades permit a greater Safe Working Load (SWL) at the same chain cross-section. The SWL is permanently marked on a tag attached to the chain. Periodic inspections, typically annual, check for wear, cracks, and permanent deformation that would increase the risk of failure under load. Lifting chains should not be confused with wire rope slings or textile webbing slings, which fall under different standards and inspection regimes.
Next steps
Matching tools and partners
Related Terms
You might also be interested in these terms
Logistics knowledge straight to your inbox
Free · No password · Never a paywall. Weekly top news and facts from logistics.
Community Questions & Answers
Share your knowledge, ask follow-up questions, or add practical insights to this page. Every contribution is moderated before publication.
No community answers yet. Be the first.